Categories
General Tech IoT Linux

Making a phone notification tool using Discord Webhooks

Reading Jlelse’s blog here (https://jlelse.blog/dev/telegram-go/) I realised there is another alternative to using an automation tool like IFTTT or Microsoft Power Automate, is to use a messaging app like Discord or Telegram. Previous post on the same topic:https://jaytuckey.name/2020/04/21/making-a-simple-phone-notification-tool-using-ifttt-available-on-a-free-account/ Creating the Discord Notification Webhook To make a personal notifier using discord you will need to make […]

Categories
IoT

How to Flash Tasmota using Tuya-Convert onto a Arlec 5 Outlet Smart Powerboard PB89HA from Bunnings

Here are my notes from the process of flashing this smart powerboard using Tuya-Convert – https://github.com/ct-Open-Source/tuya-convert This is the powerboard: https://www.bunnings.com.au/arlec-5-outlet-smart-powerboard-with-grid-connect_p0074830 These are my notes: Arlec Model: PB89HA 5 Outlet Smart Powerboard – 1 always-on 4 swichable Running on Ubuntu 20.04 Steps: Clone tuya-convert repo run ./install_prereq.sh edited the config.txt and set: WLAN=wlp3s0 rebooted for […]

Categories
IoT

How to Flash Tasmota using Tuya-Convert onto a Arlec Smart Plug PC190HA from Bunnings

Here are my notes from the process of flashing this smart plug using Tuya-Convert – https://github.com/ct-Open-Source/tuya-convert This is the plug: https://www.bunnings.com.au/arlec-smart-plug-in-socket-with-grid-connect_p0135440 These are my notes: Arlec Model: PC190HASmart Plug-in Socket with Grid Connect Running on Ubuntu 20.04 Steps: Clone tuya-convert repo run ./install_prereq.sh edited the config.txt and set: WLAN=wlp3s0 rebooted for a clean environment run […]